Welcome to our new site - login/register for benefits

Pro-Ject EVO 10 CC Tonearm High Gloss

♻️ Trade In and Pay Less Trade your existing kit toward this purchase
Pro-ject
Product ID: 2294
  • 10-inch one-piece carbon-fibre armtube
  • Inverted cardanic ABEC 7 bearing, ultra-low friction
  • Continuous VTA and azimuth adjustment
Read full description
£1,225.00
Delivery: Free | Collection: Free
Condition: New (More info)
Available to order (More info)
🎛️ 1 other option available from £775.00
🎁 Q Club Reward
Join free to unlock
Buy qualifying products to unlock your free accessories reward budget!

Videos


Description

The Pro-Ject EVO 10 CC is a 10-inch tonearm from the EVO CC range, sitting above the entry-level EVO AS arms and forming part of Pro-Ject's current generation of premium aftermarket and factory-fit tonearms. The range is available in 9, 10, and 12-inch versions, in two finishes: CC Black and CC HG (High Gloss). The EVO 10 CC is designed to offer a substantial upgrade path for turntable owners seeking improved retrieval, lower noise, and more precise cartridge alignment over budget-specification arms.

Construction

The armtube is a single-piece conical carbon-fibre tube: carbon is chosen for its high stiffness-to-mass ratio, and the conical taper is intended to suppress standing-wave reflections along the tube. The bearing is an inverted cardanic design using ABEC 7-rated stainless steel tips, housed in a full aluminium block. ABEC 7 tolerances represent a high-precision grade, and the inverted cardanic geometry is intended to minimise bearing friction while maintaining the rigidity needed for consistent tracking. The counterweight is TPE-damped to reduce resonances transmitted back through the armtube. Shiny aluminium parts are polished by hand. The outside ring of the bearing housing is open in design to prevent bell-mode resonances.

Adjustment and Setup

The armtube is secured by a single screw, allowing rotation for azimuth adjustment. VTA (Vertical Tracking Angle) is continuously adjustable by loosening two grub screws on the bearing pillar. The silicone-damped armlift can also be adjusted to suit arm height. Cartridge compatibility for the 10-inch version spans 6 to 14 grams, with a tracking force range of 0 to 3 grams. The headshell uses a standard 12.7 mm slot pitch. The gold-plated 5-pin DIN output socket accepts standard tonearm cables. Inner wiring is flexible high-purity copper.

The High Gloss Finish

The HG (High Gloss) version features green-coloured counterweight and accent components, distinguishing it visually from the CC Black version. The carbon armtube and polished aluminium hardware remain consistent across both finishes. The EVO CC range is made in Europe.


Specification

Type10-inch tonearm
Armtube MaterialOne-piece conical carbon fibre
Bearing TypeInverted cardanic, ABEC 7 stainless steel tips
Bearing HousingFull aluminium
Inner WiringFlexible high-purity copper
Output SocketGold-plated 5-pin DIN
Effective Tonearm Length254 mm
Mounting Distance238 mm
Offset Angle21.4 degrees
Overhang16 mm
Headshell Slot Pitch12.7 mm
Effective Tonearm Mass8.5 g
Compatible Cartridge Weight6 to 14 g
Tracking Force Range0 to 3 g
Null Point (inner)126.8 mm
Null Point (outer)248.2 mm
Tonearm Weight (without flange)269 g
FinishHigh Gloss (HG)
OriginMade in Europe
Also Available AsEVO 9 CC (9-inch), EVO 12 CC (12-inch); CC Black finish

All Options (2)

Currently Viewing
Pro-Ject EVO 10 CC Tonearm High Gloss

Pro-Ject EVO 10 CC Tonearm High Gloss

£1,225.00
Available to order
Pro-Ject EVO 10 CC Tonearm Black

Pro-Ject EVO 10 CC Tonearm Black

£775.00
Available to order