<\!-- DESCRIPTION -->
The Polk Audio HTS 10 is designed to deliver controlled, low-frequency performance for both music and home cinema systems. It forms part of Polk Audio’s HTS Series and is intended to provide extended bass response while remaining easy to integrate with a wide range of AV receivers and stereo amplifiers.
Bass is produced by a long-throw 10-inch Dynamic Balance driver, driven by a high-current Class D amplifier. The cabinet uses internal bracing to help reduce unwanted resonance, supporting clean bass reproduction even during demanding playback.
Polk Audio’s Power Port bass reflex system is designed to extend low-frequency output while reducing port turbulence and audible noise. Adjustable crossover and phase controls allow the HTS 10 to be accurately matched to partnering speakers and room acoustics.
<\!-- SPECIFICATIONS -->
| Height | 42.2 cm (16.6") |
|---|
| Width | 38.4 cm (15.1") |
|---|
| Depth | 40.9 cm (16.1") |
|---|
| Weight | 17.12 kg (37.75 lbs) |
|---|
| Driver | 10-inch (25.4 cm) Dynamic Balance polypropylene, Klippel optimised |
|---|
| Enclosure Type | Power Port bass vented |
|---|
| Peak Power | 200 Watts |
|---|
| Continuous Power | 100 Watts |
|---|
| Frequency Response | 25 Hz - 180 Hz |
|---|
| -3dB Limits | 30 Hz - 120 Hz |
|---|
| Nominal Impedance | 8 ohms |
|---|
| Amplifier Class | Class D |
|---|
| Audio Inputs | LFE (unfiltered), Stereo Line Level (2x RCA) |
|---|
| Controls | Volume, Low Pass Filter (30-120 Hz), Phase (0/180°), Auto on/off, 12V DC trigger |
|---|
