The Denon PMA-600NE is a two-channel integrated stereo amplifier designed for hi-fi music systems. Delivering up to 70 watts per channel, it provides controlled amplification for bookshelf and floorstanding loudspeakers in domestic listening environments.
Equipped with both analogue and digital inputs, the PMA-600NE allows connection of traditional audio sources alongside modern digital components. This makes it suitable for mixed-source systems where simplicity and flexibility are required.
Intended for music-focused listening, the amplifier offers straightforward operation and consistent performance as the central hub of a two-channel hi-fi setup.
Specifications
Channels
2
Audio Inputs
5
Audio Outputs
1
Pre-Out
Subwoofer
Phono Input
MM
Number of Terminals
2
Digital-In
2 x Optical, 1 x Coaxial
Digital-In Sample Rate
192 kHz / 24-bit
Output Power 8 Ohms
45W (20 Hz - 20 kHz, T.H.D. 0.07%)
Output Power 4 Ohms
70W (1 kHz, T.H.D. 0.7%)
Total Harmonic Distortion
0.02%
Input Sensitivity: MM
2.5 mV / 47 kohm
Signal to Noise Ratio: MM
84dB
Input Sensitivity: High Level
110 mV / 30 kohms
Signal to Noise Ratio: High Level
105dB
Treble Control
± 8 dB at 10 kHz
Bass Control
± 8 dB at 100 Hz
DAC Chip
PCM5141
HEOS Link Compatibility
IR
Features
Bluetooth, Analogue Mode, Advanced HC-TR Single Push Pull Circuit, Wide Range Amplifier, High Current Dynamic Power Supply, Power Amp Discrete Construction, Micro Processor Auto Off, Balance/Bass/Treble Control, Shottky Diodes, Solid Heat Sinks, Source Direct, Remote Control Bus In/Out, Headphone Out, Metal Front Panel, Auto Power Off, System Remote Function
The Denon PMA-600NE is a two-channel integrated stereo amplifier designed for hi-fi music systems. Delivering up to 70 watts per channel, it provides controlled amplification for bookshelf and floorstanding loudspeakers in domestic listening environments.
Equipped with both analogue and digital inputs, the PMA-600NE allows connection of traditional audio sources alongside modern digital components. This makes it suitable for mixed-source systems where simplicity and flexibility are required.
Intended for music-focused listening, the amplifier offers straightforward operation and consistent performance as the central hub of a two-channel hi-fi setup.
Specifications
Channels
2
Audio Inputs
5
Audio Outputs
1
Pre-Out
Subwoofer
Phono Input
MM
Number of Terminals
2
Digital-In
2 x Optical, 1 x Coaxial
Digital-In Sample Rate
192 kHz / 24-bit
Output Power 8 Ohms
45W (20 Hz - 20 kHz, T.H.D. 0.07%)
Output Power 4 Ohms
70W (1 kHz, T.H.D. 0.7%)
Total Harmonic Distortion
0.02%
Input Sensitivity: MM
2.5 mV / 47 kohm
Signal to Noise Ratio: MM
84dB
Input Sensitivity: High Level
110 mV / 30 kohms
Signal to Noise Ratio: High Level
105dB
Treble Control
± 8 dB at 10 kHz
Bass Control
± 8 dB at 100 Hz
DAC Chip
PCM5141
HEOS Link Compatibility
IR
Features
Bluetooth, Analogue Mode, Advanced HC-TR Single Push Pull Circuit, Wide Range Amplifier, High Current Dynamic Power Supply, Power Amp Discrete Construction, Micro Processor Auto Off, Balance/Bass/Treble Control, Shottky Diodes, Solid Heat Sinks, Source Direct, Remote Control Bus In/Out, Headphone Out, Metal Front Panel, Auto Power Off, System Remote Function
