The Polk HTS 10 is designed to deliver controlled, low-frequency performance for both music and home cinema systems. It forms part of Polk’s HTS Series and is intended to provide extended bass response while remaining easy to integrate with a wide range of AV receivers and stereo amplifiers.
Bass is produced by a long-throw 10 inch Dynamic Balance driver, driven by a high-current Class D amplifier. The cabinet uses internal bracing to help reduce unwanted resonance, supporting clean bass reproduction even during demanding playback.
Polk’s Power Port bass reflex system is designed to extend low-frequency output while reducing port turbulence and audible noise. Adjustable crossover and phase controls allow the HTS 10 to be accurately matched to partnering speakers and room acoustics.
Specifications
Height16.614" (42.2 cm)
Width15.118" (38.4 cm)
Depth16.1" (40.89 cm)
Weight37.75 lbs (17.12 kg)
Subwoofer Array Driver Enclosure TypePower Port Bass Vented
Subwoofer Array Driver Complement:
• (1) 10" (25.4 cm) d (Round) Polypropylene Dynamic Balance and Klippel optimized driver - Subwoofer
Peak Power200 Watts
Continuous Power100 Watts
Total Frequency Response25 Hz → .180 Hz
Nominal Impedance8 ohms
Lower and Upper -3dB Limits30 Hz → .120 Hz
Amplifier ClassClass D
Audio Input:
• LFE (Unfiltered) • Stereo Line Level - (2) RCA
IO Button LocationBack Panel
Adjust:
• Volume +/- • Low Pass Filter (30Hz-120Hz) • Phase (0/180°) • Power: Auto on/off • Power: DC control (12V trigger)
The Polk HTS 10 is designed to deliver controlled, low-frequency performance for both music and home cinema systems. It forms part of Polk’s HTS Series and is intended to provide extended bass response while remaining easy to integrate with a wide range of AV receivers and stereo amplifiers.
Bass is produced by a long-throw 10 inch Dynamic Balance driver, driven by a high-current Class D amplifier. The cabinet uses internal bracing to help reduce unwanted resonance, supporting clean bass reproduction even during demanding playback.
Polk’s Power Port bass reflex system is designed to extend low-frequency output while reducing port turbulence and audible noise. Adjustable crossover and phase controls allow the HTS 10 to be accurately matched to partnering speakers and room acoustics.
Specifications
Height16.614" (42.2 cm)
Width15.118" (38.4 cm)
Depth16.1" (40.89 cm)
Weight37.75 lbs (17.12 kg)
Subwoofer Array Driver Enclosure TypePower Port Bass Vented
Subwoofer Array Driver Complement:
• (1) 10" (25.4 cm) d (Round) Polypropylene Dynamic Balance and Klippel optimized driver - Subwoofer
Peak Power200 Watts
Continuous Power100 Watts
Total Frequency Response25 Hz → .180 Hz
Nominal Impedance8 ohms
Lower and Upper -3dB Limits30 Hz → .120 Hz
Amplifier ClassClass D
Audio Input:
• LFE (Unfiltered) • Stereo Line Level - (2) RCA
IO Button LocationBack Panel
Adjust:
• Volume +/- • Low Pass Filter (30Hz-120Hz) • Phase (0/180°) • Power: Auto on/off • Power: DC control (12V trigger)
