The KEF Q350 AV 5.0 Speaker Package brings together four Q350 bookshelf speakers and a Q650c centre channel to create a complete surround sound system built around KEF's signature Uni-Q driver array. The Q Series sits at the heart of KEF's loudspeaker range, positioned above the entry-level Q150 and below the performance-focused R Series, offering a balance of engineering refinement and accessibility that has earned widespread critical acclaim.
Uni-Q Driver Technology
At the centre of every speaker in this package is KEF's Uni-Q driver array, which places the 25mm vented aluminium dome tweeter at the acoustic centre of the 165mm aluminium mid-bass cone. This concentric arrangement means high and low frequencies radiate from a single point source, producing a more uniform dispersion pattern than conventional two-way designs where the drivers are physically separated. The result is a wider listening sweet spot and more consistent tonal balance across the room — a particular advantage in a surround sound configuration where listeners are rarely positioned equidistant from all five speakers.
Q350 Bookshelf Speakers
The four Q350 bookshelf speakers handle the front left, front right, rear left, and rear right channels. Each is a two-way bass reflex design with the 165mm Uni-Q driver delivering a frequency response of 63Hz–28kHz (±3dB) and extending to 42Hz at the −6dB point. Sensitivity is rated at 87dB (2.83V/1m) with a nominal impedance of 8 Ohms (minimum 3.7 Ohms), and each speaker is capable of a maximum output of 110dB. KEF recommends amplification between 15 and 120 watts per channel.
Q650c Centre Channel
Dialogue clarity is handled by the Q650c, a 2.5-way bass reflex centre channel that adds a dedicated 165mm aluminium low-frequency driver and a 165mm aluminium auxiliary bass radiator (ABR) alongside the Uni-Q array. This three-driver configuration extends low-frequency output to 55Hz (−6dB) while maintaining the same 87dB sensitivity and 8 Ohm nominal impedance as the Q350s. The Q650c accepts amplification from 15 to 150 watts and delivers a maximum output of 110dB, ensuring it can keep pace with the surround speakers during dynamic film soundtracks.
System Integration
All five speakers in this package share the same Uni-Q driver technology, aluminium cone materials, and voicing philosophy. This tonal consistency across all channels ensures seamless panning of sound effects and a cohesive soundstage, whether the content is a two-channel stereo recording expanded through a surround processor or a native 5.0 film mix. The package requires a separate AV receiver or amplifier — it does not include amplification or a subwoofer.
What the Press Says
- “Stunning clarity and refined detail makes the Q350s a cut above most” — What Hi-Fi? ★★★★★ (December 2019)
- What Hi-Fi? Awards 2018 winner
| Package Contents | 4x KEF Q350, 1x KEF Q650c |
| Configuration | 5.0 (no subwoofer) |
| Q350 Design | Two-way bass reflex |
| Q350 Drive Units | 165mm (6.5in.) aluminium Uni-Q with 25mm (1in.) vented aluminium dome HF |
| Q350 Frequency Response | 63Hz–28kHz (±3dB) |
| Q350 Frequency Range | 42Hz (−6dB) |
| Q350 Sensitivity | 87dB (2.83V/1m) |
| Q350 Impedance | 8 Ohms (min. 3.7 Ohms) |
| Q350 Crossover Frequency | 2.5kHz |
| Q350 Maximum Output | 110dB |
| Q350 Amplifier Requirements | 15–120W |
| Q350 Dimensions (H x W x D) | 358 x 210 x 306mm |
| Q350 Weight | 7.6kg each |
| Q650c Design | 2.5-way bass reflex |
| Q650c Drive Units | 165mm (6.5in.) aluminium Uni-Q with 25mm (1in.) vented aluminium dome HF, 165mm (6.5in.) aluminium LF, 165mm (6.5in.) aluminium ABR |
| Q650c Frequency Response | 64Hz–28kHz (±3dB) |
| Q650c Frequency Range | 55Hz (−6dB) |
| Q650c Sensitivity | 87dB (2.83V/1m) |
| Q650c Impedance | 8 Ohms (min. 4.2 Ohms) |
| Q650c Maximum Output | 110dB |
| Q650c Amplifier Requirements | 15–150W |
| Also Available As | Satin Black |