Monitor Audio Radius R90HD10 AV Packages

R90HD

The R90HD is a high-class mini monitor. Unprecedented enclosure rigidity and leading edge drive unit technology in the shape of a 100mm (4) MMPII mid/bass driver and 25mm (1) C-CAM gold dome tweeter combine to produce clarity, dynamics and imaging abilities that are unparalleled in a speaker of this size. It can fill a room with high fidelity sound and yet visually melt into the background. The R90HD can be installed easily on ceiling or wall using the same high quality angled bracket supplied. Use the optional bespoke RadiusHD stand for floor positions.

Features:

4" MMPII. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion, resulting in fast punchy bass. All drivers are dedicated and model specific, with each model in the Radius HD series being designed and voiced individually.

1" Gold C-CAM tweeter providing extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully.

Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays.

High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses.

Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.

Internal PTC auto-reset protection circuit to prevent over-driving.

Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance.

Flush fitting grille with rotate-able m logo for positioning in Landscape or portrait orientation.

A specially designed die-cast metal wall bracket is supplied, providing easy install and adjustment for wall positioning

Specifications

Frequency Response: 80 Hz - 35 KHz

Sensitivity (1W@1m): 87 dB

Nominal Impedance: 8 Ohms

Power Handling Single (RMS): 60 W

System Power Handling (RMS): 100 W

Recommended Amplifier Requirements: 10 - 100 W

Maximum SPL (dBA): 105

Bass Alignment: Bass reflex - rear ported

Drive Unit Complement: 1 x 100mm (4") MMPII cone mid-bass driver. 1 x 25mm (1") C-CAM gold dome tweeter

External Dimensions (H x W x D): mm 198 x 125 x 140 mm

Weight (each): 2 Kg

R180HD

The slightly larger and more versatile R180HD offers the same irresistible blend of virtues as the R90HD, but can be installed vertically as a main, side or rear speaker, or horizontally as a centre channel speaker using the bespoke low-profile wall bracket supplied. Its enhanced bass performance makes it ideal for discreet music applications around the home. Combined with a R360HD or R370HD subwoofer however, the R180HD will form part of a formidably powerful stereo or multi-channel home cinema system.

Features:

4" MMPII. The Metal Matrix Polymer drivers have been completely re-worked and re-modelled with the aid of new design and simulation tools to achieve higher sensitivity and increased magnetic linearity. The new shaped T-section pole and focussed magnetic gap produces better linearity and lower distortion, resulting in fast punchy bass. All drivers are dedicated and model specific, with each model in the Radius HD series being designed and voiced individually.

1" Gold C-CAM tweeter providing extension to in excess of 35 KHz ensuring the wide frequency bandwidth of HD music and cinema formats can be replayed faithfully.

Magnetically shielded drivers allow Radius HD to be safely used near sensitive microprocessor equipment or plasma/LCD displays.

High quality crossover uses high-grade metalised Polypropylene capacitors for increased clarity. High-grade air core and laminated iron core inductors give lowest possible distortion and low insertion losses.

Specially developed high grade PCOFC internal cable is used throughout to ensure maximum signal transfer at all frequencies and low signal resistance.

ARC front baffle (Anti-Resonance Composite). Originally developed for our high-end Platinum series, ARC is a cast thermo-set polymer loaded with minerals to provide very inert, optimally damped components. It is ideal for high-end acoustic applications where a high degree of structural rigidity and vibration damping is required.

Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.

Front firing port.

Internal PTC auto-reset protection circuit to prevent over-driving.

Flush fitting grille with rotate-able m logo for positioning in Landscape or portrait orientation.

A specially designed die-cast metal wall bracket is supplied, providing easy install and adjustment for wall positioning

Frequency Response: 60 Hz - 35 KHz

Sensitivity (1W@1m): 87 dB

Nominal Impedance: 8 Ohms

Power Handling Single (RMS): 60 W

System Power Handling (RMS): 100 W

Recommended Amplifier Requirements: 10 - 100 W

Maximum SPL (dBA): 105

Bass Alignment: Bass reflex - rear ported

Drive Unit Complement: 1 x 100mm (4") MMPII cone mid-bass driver. 1 x 25mm (1") C-CAM gold dome tweeter

External Dimensions (H x W x D): 350 x 125 x 105 mm

Weight (each): 2.8 Kg

R370HD

The R370HD active subwoofer provides a new dimension to a systems sound. Its 255mm (10) C-CAM downward firing driver, powered by a potent 250W (RMS) Class D amplifier, will extend the reach of the RadiusHD satellites to add the deepest drama to movies and music.

The R370HDs lowest frequencies are controlled so expertly that even subtle effects are better defined, enhancing the listening experience with bass you can feel as well as hear. The R370HD is equipped with a top-mounted control panel for easy access to volume and 2 EQ settings, 12V trigger input for power on/standby control from an AV amplifier, variable crossover control from 40Hz-120Hz, stereo, LFE RCA inputs and link outputs.

Features:

Top mounted control panel - for easy access to volume and EQ settings.

18mm MDF cabinet construction with internal bracing

250W RMS Class D amplifier with switching power supply

Downward firing 10 Ultra long throw, C-CAM bass driver.

12 Volt trigger input For power on/ standby control from AV amplifier.

Crossover/ frequency control. Variable from 40z-120Hz

Low pass filter switch for LFE or Stereo input selection

0-180 Phase switch

Power switch with ON Auto- Off/ trigger settings

Stereo/ LFE RCA inputs

Stereo/ LFE link outputs

Silicone rubber anti-resonance feet

2 x Pre-set EQ settings for Music or video programme optimisation

Specifications

Low Frequency Limit: 28 Hz (EQ1) 25 Hz (EQ2)

Upper Frequency Limit: 40 - 120 Hz Variable

Low Pass Filter Alignment: 12dB / Octave variable +12dB / Octave fixed (2 stage)

Cabinet Specification: Sealed Cabinet of 18mm (3/4) M.D.F. construction

Amplifier Output (RMS): 250 W

Amplifier Classification: Class - D Digital amplifier

Driver Complement: 1 x 10" C-CAM subwoofer driver

Input Impedance: 20K Ohms

Mains Input Voltage (factory preset): 110 - 120 Vac / 220 - 240 Vac 50/60Hz

External Dimensions (H x W x D): mm 370 x 320 x 320

Weight: 11.87